彩票软件app大全下载

Welcome to the website of Baotou Pangtian Electrical Equipment Co., Ltd.!

Product Categories

contact us

Baotou Pangtian Electrical Equipment Co., Ltd.

Service Hotline: 0472-6868842

Contact: 13722076608 (Manager Zhang)

18018652606 (Manager Wu)

Address: No. 18-19, Building 5, Northwest District, Haode, Donghe District

Website: zggz88.com


Ladder cable bridge manufacturers

Your current location : Home >> Products >> Ladder bridge

Ladder cable bridge manufacturers

  • 梯式电缆桥架厂家
  • Category: Ladder bridge

  • hit count:
  • Release Date: 2019/05/17
  • Online Inquiry
  • Detailed introduction

梯式电缆桥架

Selection of cable bridge fire rating

The cable bridge is in the section with fire protection requirements. The cable ladder frame and tray can be added with fire-resistant or flame-resistant plates, nets and other materials to form a closed or semi-closed structure. The overall fire resistance performance of measures such as applying fire-resistant coating should meet the requirements of relevant national codes or standards. In places with high fire protection requirements, it is not suitable to use aluminum alloy cable trays.

Under the same specifications, flame-retardant cable trays are 2.2 times more expensive than steel cable trays, their service life is more than 5 times that of steel cable trays, and their weight is 30% heavier than steel cable trays. Fire-resistant cable tray is slightly more expensive than steel cable tray, its service life is more than 3 times that of steel cable tray, and its weight is basically the same as steel cable tray.

Selection of filling rate of cable tray

The selection of the width and height of the cable ladder frame and tray should meet the requirements of the filling rate. In general, the filling rate of the cable ladder frame and the tray can be 40% -50% for power cables and 50% -70% for control cables. And 10% to 25% of the project development margin should be reserved.

Selection of load level of cable tray

When selecting the load level of the cable bridge, the working uniform load of the cable bridge should not be greater than the rated uniform load of the selected load level of the cable bridge. If the actual span of the support and hanger of the cable bridge is not equal to 2m, the work should be uniform. The cloth load shall meet the requirements. Under the conditions of corresponding loads, the specifications and dimensions of various components and hangers should match the straight sections of the pallets, ladder frames, and bent series.

Selection of specifications of cable tray

In engineering practice, the problem in selecting the size of the cable tray is either too large or too tight. How to choose a reasonable size of cable tray? Articles 8, 10, and 7 of the Code for Electrical Design for Civil Buildings (JGJ16-2008) stipulate: "The ratio of the total cross-sectional area of the cable to the cross-sectional area inside the tray, the power cable should not be greater than 40%; the control cable should not be greater than 50%. "

Select cable tray according to cable bending radius

When selecting the bent-through or lead-in and lead-out device of Baotou cable tray , it should not be less than the minimum allowable bending radius of the cable in the cable tray.

URL of this article: http://zggz88.com/product/665.html

Keywords: ladder cable tray , cable tray , ladder cable tray production and processing

Previous : Nothing Next : Cable tray installation

Recently Viewed:

    Welcome to leave us a message
    Please enter your message here and we will contact you as soon as possible.
    Name
    Contact person
    phone
    Landline / mobile number
    mailbox
    mailbox
    address
    address
    ?赌大小口诀 星鸿娱乐注册平台登录 姚记亚洲彩票软件app大全下载 蒙特卡罗官方赌场网址 龙成国际38元免费彩金 凯发电投网站 乐艺彩票下载平台 彩票pk注册网址 三分彩官网集团 大地彩票计划app